Replacing Old Sliding Door Rollers

Replace the roller screws and use your phillips screwdriver to turn them clockwise until tight.

Replacing old sliding door rollers.

Replace the bottom frame. Insert the replacement sliding door rollers into the cavity along the bottom of the door. Before you can replace your old roller you first need to remove the door panels from the track. Make sure the rollers spin sufficiently before re installing your sliding glass door.

However if the rollers are worn cracked or bent remove them photo 4 and replace them with a new pair. Clean the sliding door track of all dust and debris by using a vacuum cleaner before replacing the door panels on to the track. Insert the new rollers in the door lining up the holes on the rollers with the holes in the bottom of the door insert the new rollers in place. Unscrew the rollers and remove them.

Take a roller to your local hardware store and purchase a replacement. You can find replacement patio sliding glass door hardware here. In this video we show you how to replace a roller in a patio sliding glass door. Replace with the new roller and re insert the screws.

Then if you have a vinyl door unscrew the old rollers and slot in the new ones before screwing them into place. Before installing new rollers adjust them to lowest possible position so panel is low in door not raised up. The first step regardless of what kind of door you have is removing the door from the track. Use the wooden block and rubber mallet to gently tap the frame back onto the.

Using a hook tool we used a balance hook a bent hanger or needle nosed pliers grip underside of roller housing or roller adjustment screw through side of door and pull out. Always take the roller with you to the hardware store to avoid purchasing the wrong piece. Replace the roller if the rollers or sliding glass door wheels are full of dirt and debris give them a good cleaning and a few drops of lubricant and see if they spin freely.